| POLYCLEAN -VSA is a unique oil and grease stain remover-cum-scouring agent for cotton, polyester & their blends. It is easily miscible with water in all proportions and is compatible with Acid or Alkaline conditions normally used for desizing or scouring. It is free of Chlorinated Solvents, oxidizing and reducing agents and no special precautions are needed in its handling. It is remarkable that even on padding with POLYCLEAN –VSA, cloth is freed from HALO mark, in fact it gives best detergency. |
| |
| GENERAL CHARACTERTICS |
| APPEARANCE |
:- Light brown coloured viscous liquid. |
| pH |
:- 6 to 7 |
| STABILITY TO HARD WATER |
:- Good |
| IONIC NATURE |
:- Nonionic |
|
| |
| APPLICATION (For 100 Kgs. Cloth) |
| SYNTHETIC :- In Jigger POLYCLEAN - VSA 1.5 Kgs., at 600 to 800C for 6 turns and H2O2(50%) 1 Kg., POLYCOL - TPS 0.5 Kg. for bleaching along with soda ash - 1.0 Kg. or Caustic Soda 0.5 Kg. |
| |
| SYNTHETIC & COTTON BLEND : -In Jigger POLYCLEAN - VSA 1.5 Kgs., Caustic Soda 1½ Kgs., Soda Ash 1 kg. at boil for 6 turns and H2O2 (50%) 2 Kgs., POLYCOL – TPS 0.75 Kg. for bleaching. |
| |
| The scoured cloth shows the maximum dye absorption and optimum penetration in the printed goods giving maximum colour value. |
| |
| JET DYEING |
| When the oil stains are not heavy the gray cloth may be heat set and straightway loaded in Jet Dyeing Machine. POLYCLEAN - VSA 1.5 Kgs. may be added with usual colour and chemicals and dyeing carried out in the normal manner. The stains are seen to be effectively removed and cloth are dyed satisfactorily without any additional scouring |
| |
| Role of POLYCLEAN - VSA in removing “KANDI MARKS” |
| The following recipe has been found to be most effective for removal of “Kandi Marks” |
POLYCLEAN - VSA - 10 g/l
Soda Ash - 10 g/l
H2O2 (50%) - 1% (OWF)
POLYCOL - TPS - 2 g/l |
| |
| The fabric is to be treated at 90C for 1 hour. |
PACKING 50 Kgs. net in HDPE Containers. |
| |
|
